MR 300i HARD ENDURO 2027
FACTORY EQUIPPED
FOR HARD ENDURO
The MR 300i HARD ENDURO MY27 is the most equipped version of the MR range, specifically designed for Hard Enduro. It starts with the 2T TFI injection engine and incorporates unique modifications—such as the inertia sleeve, Hard water pump cover with a higher flow turbine, and specific spark plug—aimed at increasing inertia and thrust at low revs in the slowest and most technical sections.
Its reinforced cooling system, with a specific expansion tank and dual fan module, keeps the engine within its optimal range even at low speeds. Completing the package are a specific HARD exhaust, a short attack transmission with AXP chain guide, and a Hard Offroad Wave rear disc.
It comes factory-equipped with protective gear that is optional in other versions: AXP Enduro skid plate, swingarm protector, front and rear disc protectors, offset stainless steel footpegs, and front and rear pull straps.
Ready for the greatest challenges you can imagine.
MODEL HIGHLIGHTS
Black XTRIG triple clamps, EXCEL rims with black machined hub, simplified electrical installation with dual start button, Hard red seat, and the new Hard 2027 graphics. The most equipped version of the MR range, down to the last detail.
EXCLUSIVE HARD ENDURO DETAILS
The TFI taken to the most extreme terrain. Based on the TFI injection engine, the Hard Enduro version incorporates specific modifications—such as an inertia sleeve, a Hard water pump cover with a higher flow turbine, and a specific spark plug—designed to gain inertia, provide thrust at low revs, and offer absolute control in the slowest and most technical sections.
TFI ENGINE WITH HARD ENDURO MODIFICATIONS
When the pace slows down and the temperature rises, the Hard Enduro doesn't give up. Specific expansion tank, pre-mounted radiator, and dual fan module to keep the engine in its optimal window even in the slowest and most demanding sections of Hard Enduro.
ENHANCED COOLING
An exhaust developed exclusively for this version, which reconfigures the delivery to favor torque and traction at low revs: immediate, progressive, and easy-to-dose thrust where the rear wheel's grip is tested with every meter.
SPECIFIC HARD EXHAUST
11-tooth output sprocket (Z11) and red AXP chain guide. A transmission designed for climbing, with a shorter gear ratio that multiplies traction on trial sections, rocks, and impossible slopes, and a reinforced guide that keeps the chain in place no matter what.
SHORT ATTACK TRANSMISSION
Power, precision, and endurance for the most demanding Hard Offroad. The NISSIN calipers and master cylinders are paired with GALFER Wave discs: a 260 mm floating front disc and a specific Hard Offroad rear disc measuring 220 x 5 mm, thicker and with optimized geometry to expel mud and water. The rear also features a machined aluminum protector against impacts, maintaining consistent, progressive, and perfectly controllable braking in the most extreme conditions.
NISSIN BREAKES AND HARD OFF ROAD DISCS
EXCEL aluminum radial wheels with black machined hub, exclusive to the HARD ENDURO version. A lightweight and durable set that provides greater driving precision and an unmistakable racing aesthetic, equipped with Michelin Enduro tires to maximize grip and extract every ounce of traction.
EXCEL RIMS WITH MACHINED BLACK HUB
Factory-prepared with what others only offer as extras: AXP Enduro skid plate, swingarm protector, front and rear disc guards, machined aluminum handlebar protectors, offset stainless steel footpegs, and front and rear pull straps to maneuver the bike where riding alone is not enough.
RACING PROTECTIONS
-
Engine - New 2-stroke single-cylinder engine with TFI (Throttle-Body Fuel Injection) and Hard Offroad modifications
Injection - 2 specific BOSCH injectors differentiated for high and low RPMs
Displacement - 298 cc
Bore and stroke - 72 x 72.52 mm
Starter - New integrated electric starter
Cooling - Liquid cooling with dual electric fan
Power maps - 3 Differentiated Power Maps (Race, Forest and Wet)
Gearbox - 6-speed gearbox
Clutch - New multi-disc diaphragm clutch in oil bath
Intake - Reed with VForce 4 box
Exhaust - RIEJU Power Racing by OXA specific for Hard Offroad
-
Chassis - Central spine made of chrome-molybdenum steel
Subframe - Detachable aluminium
Swingarm - Aluminium with Progressive Linkage System
Front Fork - 48 mm inverted KYB fork, closed cartridge with AOS (Air Oil Separated) system, compression and rebound adjustable, black DLC anti-friction treatment
Shock - KYB shock absorber with preload, rebound, and high/low-speed compression adjustment, linked to progressive linkage system
Suspension travel - Front: 11.8in / Rear: 12.2
Seat - Non-slip with lowered foam and additional grip strips
Handlebars - RENTHAL Fatbar 802 double diameter 28 mm
Grips - RENTHAL
-
Front wheel - CEL rim with machined hub 1.6 x 21
Front Tire - 90/90-21 MICHELIN Enduro Medium tire
Rear wheel - EXCEL rim with machined hub 2.15 x 18
Rear Tire - 140/80-18 MICHELIN Enduro Medium tire -
Front brake - NISSIN caliper and master cylinder with GALFER 260 mm floating wave disc
Rear brake - NISSIN caliper and master cylinder with 220 mm wave disc, 5 mm thick, specific for Hard Offroad
-
Dimensions - Length x width x height: 84 x 32 × 48 in
Wheelbase - 58 in
Seat height - 36.5 in
Ground clearance - 12.5 in
Fuel - 2.58 gal
Dry weight - 230 lbs
MSRP: Coming Soon*
* MSRP does not include freight, setup, tax, title, documentation fees, or dealer installed options. See your dealer for complete details.
* MSRP includes current tariff rates and is subject to change without notice.